Accusump Pro Version Electric Pressure Control Valve 55-60 Psi - 24-275X

Produsent: Canton Racing Products
This Electric Pressure Control Valve Kit is for a discharge/refill of 55-60 PSI.
Sku: 1.00142.04-24-275X

Lagerstatus 5 på lager

Gamle prisen: NOK 3012,41 eksl mva
NOK 2879,51 eksl mva
i h
Send til
*
*
Fraktmetode
Navn
Estimert leveringsdato
Pris
Ingen fraktalternativer

This Electric Pressure Control Valve Kit is for a discharge/refill of 55-60 PSI. These valves have the convenience of an electric valve for remote mounted units and the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine’s oil pressure drops below a predetermined level and only refill when the pressure rises above that level. Our Pro version valve features a more durable piston style design, an integrated pressure port and a machined aluminum body.

 

Features:
*This Pro Electric Pressure Control Valve Kit is for a discharge/refill setting of 55-60 PSI
*Provides convenience of an electric valve for remote mounted units and the rapid refill rate of a manual valve as required in racing
*EPC valuing will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level and only refill when the pressure rises above that level

*
*
*
Kunder som kjøpte denne varen kjøpte også
Bilde av AN10 Han - 1/2"NPT Han - Nippel kobling - Svart Alu

AN10 Han - 1/2"NPT Han - Nippel kobling - Svart Alu

1.00202.08051
NOK 69,7 eksl mva
Bilde av Accusump 2 QT - Oil Accumulator - No Valve

Accusump 2 QT - Oil Accumulator - No Valve

1.00400.xx-24-026
The 2 Quart Accusump is ideal for surge control on small block V-8, V-6, and 4 cylinder engines as well as pre-oiling for all engines. Has a 12" long and 4-1/4" dia. body.
NOK 3617,84 eksl mva
Bilde av Mounting Clamps Steel For 2/3 Qt Accusump Oil Accumulator - 24-200

Mounting Clamps Steel For 2/3 Qt Accusump Oil Accumulator - 24-200

1.00109.04-24-200
Steel band mounting brackets for our 4-1/4" Dia. Accusumps. Mounting clamps are required for all Accusumps. When used on each end of an Accusump they provide the proper support at the end caps to ensure the tube does not become distorted. These are sold as a set of two stainless steel T-clamps.
NOK 457,77 eksl mva